Drivers Disc Ice Port Devices

| Posted on by

Many computer hardware components, like a video card, sound card, or motherboard, require drivers to be installed to function properly. How a driver is saved and packaged determines how it is installed. Below is information about each of the methods developers use to distribute their drivers and install them in Microsoft Windows. Additionally, there are some general insights to help prevent frustrations during the process.

Tip

In most situations, the drivers are installed after the hardware has been installed or connected to the computer. If you need help installing hardware, see: How to install computer hardware.

Drivers from a CD or DVD

DRIVERS: Looking for the right driver? Use the search bar below to find the correct driver for your Aluratek device. Connect RS232 device into any USB port on your laptop/computer. Allow 20+- seconds for Windows to attempt to install drivers automatically. If it's successful, skip to Step 2 below. However in 95% of cases, it will fail to automatically install the drivers.

Almost all computer and hardware manufacturers include a group of drivers for different hardware devices and often for each of the supported versions of Windows. For example, the driver CD you receive with your printer likely contains the drivers for many different printers and may not have the printer you purchased. When installing the drivers, make sure you are install the drivers for your printer and not another printer model. Also, make sure you are installing it for the version of Windows you are running on your computer.

Below is an example of how a file structure may look on your disc.

For example, if you had a PrinterA200 and were using Windows XP, you would find your drivers in the PrinterA200WinXP folder. Once the location of the drivers is found, you must determine how the drivers are packaged. If the folder contains executable files or a setup file, you can install the driver using an executable. If the directory contains .inf files, you can install the driver using an inf or use the 'have disk' option during the install.

Tip

If you have a CD with drivers, but the computer has no functioning disc drive, you can also download the drivers. Or, if you have access to another computer, you can copy the drivers from the CD to a USB flash drive. For help with copying files, see: How to copy files.

Drivers disc ice port devices for sale

Installing drivers from a USB drive or floppy

After the drivers are copied to a USB flash drive, floppy, or another drive, they can also be installed from that drive. Once the drive is connected to the computer, open Windows Explorer and then the drive letter for the computer drive. For example, if you have a USB drive that is assigned the E: drive when connected, you would open the E: drive.

Once the drivers are found on the drive, you must determine how the drivers are packaged. If the directory contains executable files or a setup file, you can install the driver using an executable. If the directory contains .inf files, you can install the driver using an inf or use the 'have disk' option during the install. If the drivers are compressed into a .zip file, you need to uncompress the file.

Downloading and installing a driver

Tip

If you have not yet downloaded the drivers, you can find drivers for your computer through the computer or device manufacturer. For links to the websites of prominent computer hardware manufacturers, see our hardware drivers index.

Tip

If you're downloading drivers to install on another device, you can copy or extract the files to a USB flash drive and connect it to the other computer.

After the drivers are downloaded, you must determine how the drivers are packaged. If the directory contains executable files or a setup file, you can install the driver using an executable. If the directory contains .inf files, you can install the driver using an inf or use the 'have disk' option during the install. If the drivers are compressed into a .zip file, you need to uncompress the file.

Tip

When extracting the drivers, remember where the folder containing the drivers is located since it needs to be known during the driver installation process. We recommend extracting files to a folder on the Windows desktop, as it's an easy place to remember.

Installing a driver from an executable

Today, many computer and hardware manufacturers are pre-packaging their drivers into executable files or have the drivers installed through the setup file. Double-clicking the executable or setup file should install the drivers to the computer for you.

Note

The executable may be packaged in a compressed file, which means before looking for the setup file, it needs to be uncompressed. For help with uncompressing a file, see: How to extract or decompress a compressed file. If, after uncompressing the file, it still doesn't contain an executable file, setup file, or doesn't install your hardware device, continue with the below recommendations.

Finally, if you're successful with installing your drivers and the computer asks to reboot the computer, make sure to reboot the computer after the driver is installed.

Using the 'have disk' option to install drivers

A computer or hardware manufacturer may place the drivers on a CD, diskette, or folder on the hard drive for Windows to find and use during its hardware detection. Below are steps on how to install drivers for a new device and upgrade a device's driver for this setup.

Installing a new device

  1. Open the Windows Device Manager.
  2. In the Device Manager, make sure the device you are attempting to install is not already listed from past install attempts. If the device is found, highlight and remove it from Device Manager to prevent any conflicts during the install.
  1. Once Device Manager looks okay, reboot the computer.
  2. As the computer is rebooting, an Install new hardware wizard should appear if Windows detects the new hardware. Using this wizard, point Windows to the folder containing your drivers on the CD, diskette, USB flash drive, or the folder containing the files you downloaded.

If Windows does not detect any new hardware, open the Control Panel and double-click the Add hardware icon to run the hardware detection wizard. During the steps, you have the option to install custom Windows drivers from a location on disk. Choose to load drivers, then select the folder containing the drivers for your device.

Note

The 'Add hardware' icon is only available in Windows XP and prior versions of Windows.

Once drivers are installed, reboot the computer.

Upgrading drivers for a pre-existing device

  1. Open the Windows Device Manager.
  2. In the Device Manager, locate the device you want to update.
  3. Right-click the device and click Properties.
  4. In the Properties window, click the Driver tab.
  5. Click the Update Driver button.
  6. In the Hardware Update Wizard, point Windows to the location of the updated driver files on your hard drive.

Once drivers are installed, reboot the computer.

Install a driver using a .inf file

Finally, if the above recommendations don't work, the installation instructions for drivers and hardware devices can be contained in the driver .inf file.

Locate the .inf file for your version of Windows. Right-click that file and choose the option for install.

Note

Make sure you install the correct .inf file and not a .inf file for another device or a different version of Windows.

Once you have right-clicked and installed the driver, reboot the computer.

One of the above three recommendations should have installed or updated the drivers successfully onto the computer. If you are still having difficulties getting the device to install, it is possible you are not encountering a hardware issue and not an issue with the drivers. Refer to the troubleshooting steps for your hardware device for additional help and information.

Additional information

  • See the driver definition for further information and related links.

Korg USB-MIDI Driver for Windows XP

The first time you connect the Korg USB MIDI Device to the USB port of your computer, the default USB-MIDI driver for Windows will be installed automatically. If you want to use the Korg USB-MIDI Driver for Windows XP, use the following procedure to reinstall the driver.

The driver must be installed separately for each USB port you use. If you connect the Korg USB MIDI Device to a USB port different than the one you used when installing the Korg USB-MIDI Driver, you will need to reinstall the Korg USB-MIDI Driver using the same procedure.

  • In order to install (or uninstall) the driver in Windows XP, you must have Administrator privileges. For details, contact your system administrator.
  • If you encounter problems during installation, you may need to make settings so that Windows will not stop you from installing the driver due to its lack of a digital signature. For more information, see Allowing installation of an unsigned driver.
  • This driver is for Windows XP and Windows XP x64 Edition only. It cannot be used in Windows 95/98/Me.
  • Both 64bit application and 32bit application can't access MIDI IN ports of the same USB MIDI Device simultaneously.
  • The driver for windows XP x64 Edition is a beta version. If any bugs are found, please report them to: unsupportedsoftwarebugreport@korg.co.jp.
    We appreciate your bug reports so that we can refine our software in the future.
    Please note that this address is for unsupported software only, so e-mail will NOT be responded to.

You can install/uninstall the Korg USB-MIDI Driver using the tools.
wInstalling the Korg USB-MIDI Driver using a tool
wUninstalling the Korg USB-MIDI Driver using a tool
If you want to install/uninstall the Korg USB-MIDI Driver manually, please see the following sections.
wInstalling the Korg USB-MIDI Driver manually
wUninstalling the Korg USB-MIDI Driver manually

Drivers disc ice port devices for sale

n Installing the Korg USB-MIDI Driver using a tool

1.

Use a USB cable to connect the Korg USB MIDI Device to your computer, and turn on the power of the Korg USB MIDI Device.

Windows will detect the connection with the Korg USB MIDI Device.
Then the default driver will be installed.


2.

Excute EzSetup.exe.

The list in the upper part of the window shows the KORG USB-MIDI devices that are currently connected to your PC. The lower area shows the software version of the KORG USB-MIDI Driver you are about to install.

From the list, choose the KORG USB-MIDI device that is currently connected to your PC, and click Install.
Driver installation will begin.


3.
 If a dialog box appears, warning you that the driver is not digitally signed, click Continue Anyway.


4.

When the dialog box indicating that installation is completed appears, click Finish.

If a dialog box recommends that you restart Windows, click Yes to restart.



n Uninstalling the Korg USB-MIDI Driver using a tool

1.

Excute UnInstDrv.exe.

Click Next.


2.

A list of currently installed KORG MIDI devices will be displayed.
Add a check mark only to the MIDI device you want to remove.

Be aware that all MIDI devices with a check mark will be removed.

Click Next.


3.
 A dialog box will ask you for confirmation. Click OK.


4.
 Click Finish to complete the procedure.
To ensure that the driver removal has taken effect, restart Windows.

n Installing the Korg USB-MIDI Driver manually

Drivers Disc Ice Port Devices Replacement

1.

Use a USB cable to connect the Korg USB MIDI Device to your computer, and turn on the power of the Korg USB MIDI Device.

Windows will detect the connection with the Korg USB MIDI Device.
Then the default driver will be installed.


2.

From the taskbar, click Start and then click Control Panel to open the Control Panel.

From the Control Panel, start up Sounds and Audio Devices, and click the Hardware tab.

From the list of devices, select USB Audio Device.
Make sure that the 'Location' field below the list shows the name of the Korg USB MIDI Device, and click the Properties button.


3.
 The 'USB Audio Device Properties' dialog box will appear. Click the Driver tab, and then click the Update Driver button.


4.
 The 'Hardware Update Wizard' dialog box will appear.

In the 'Can Windows connect to Windows Update to search for software?' field, click 'No, not this time' and then click Next.


5.

In the 'What do you want the wizard to do?' field, click 'Install from a list or specific location' and then click Next.


6.
 In response to 'Please choose your search and installation options, you must click 'Don't search. I will choose the driver to install', and then click Next.


7.
 In response to 'Select the device driver you want to install for this hardware,' click the Have Diskbutton.


8.
 You will be asked for the name of the folder. Insert the CD-ROM included with the Korg USB MIDI Device into your CD-ROM drive. Then type the name of the folder D:Driver that contains the KORG USB MIDI Driver, and click the OK button.
This example is for when your CD-ROM drive is drive D. You will need to change this as appropriate for your computer system; for example, if your CD-ROM drive is drive E, then replace D: with E: in the folder name you type.


9.
 Make sure that the name of the Korg USB MIDI Device is displayed as the Model, and click Next to begin installing the driver.


10.
 If a dialog box appears, warning you that the driver is not digitally signed, click Continue Anyway.


11.
 When the dialog box indicating that installation is completed appears, click Finish.
If a dialog box recommends that you restart Windows, click Yes to restart.

Drivers Disc Ice Port Devices Gigabit


n Uninstalling the Korg USB-MIDI Driver manually

1.

From the taskbar, click Start and then click Control Panel to open it.

From the Control Panel, open Sounds and Audio Devices, and click the Hardware tab.

From the list of devices, select the name of the Korg USB MIDI Device and click the Properties button.


2.
 The Korg USB MIDI Device Properties dialog box will appear.
Click the Driver tab, and click the Uninstall button.


3.
 A dialog box will ask you for confirmation.
Click the OK button.

n Allowing installation of an unsigned driver

Drivers Disc Ice Port Devices Amazon

If your computer has been set so that drivers without a digital signature cannot be installed, you will not be able to install the Korg USB-MIDI Driver. Use the following procedure to change your settings so that you can install the driver.

1.

On the taskbar, click the Start button and then Control Panel to open the Control Panel.

From the Control Panel, open System and click the Hardware tab.
Then click the Driver Signing button.


2.

If What action do you want Windows to take? is set to Block, you will not be able to install the driver. Choose Ignore or Warn, and then click OK.

If necessary, change this setting back to its original setting after you have installed the driver.

Drivers Disc Ice Port Devices For Sale

'); else document.write('); //-->