Emulex SCSI & RAID Devices Driver Download For Windows 10

| Posted on by

# lspci grep -i emulex 05:0d.0 Fibre Channel: Emulex Corporation LP9802 Fibre Channel Host Adapter (rev 01) # # cat /sys/class/scsihost/h. Emulex Fibre Channel Scsi Target Driver San Francisco. SVC will support all OS applications at any level that run to the standard block level OS interface. This includes such applications as Oracle, HP Virtual Connect, etc. Note:. The levels shown in italic text indicate previously recommended levels. The Emulex OneCore Storage SDK supports the Service Level Interface 4 (SLI-4) API and is compatible with the latest generation of Emulex 8 and 16 Gb/s Fibre Channel HBAs (LPe15000 and LPe16000 series), It supports both target and initiator mode of operation and a number of advanced features: NPIV, T10-PI, etc.

# lspci | grep -i emulex
05:0d.0 Fibre Channel: Emulex Corporation LP9802 Fibre Channel Host Adapter (rev 01)
#
# cat /sys/class/scsi_host/host0/fwrev
1.90A4 (H2D1.90A4)
#
# cat /sys/class/scsi_host/host0/node_name
0x20000000c94f7dd9
#
# cat /sys/class/scsi_host/host0/port_name
0x10000000c94f7dd9
#
# cat /sys/class/scsi_host/host0/lpfc_drvr_version
Emulex LightPulse Fibre Channel SCSI driver 8.0.16.27
#
# cat /sys/class/scsi_host/host0/serialnum
MS54376943
#
# cat /sys/class/scsi_host/host0/speed
Windows2 Gigabit
#
# cat /sys/class/scsi_host/host0/state
Link Up - Ready:
Fabriccat /etc/redhat-release
[root@localhost ~]# cd /sys/class/scsi_host/host1/device/fc_host:host1/
[root@localhost fc_host:host1]# more port_name
0x10000000c96dffce
How to identify/get QLogic WWN on Red Hat Enterprise Linux 5 (RHEL5).
First identify your installed or recognized
# lspci | grep -i fibre
04:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
04:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
05:00.0 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
05:00.1 Fibre Channel: QLogic Corp. ISP2432-based 4Gb Fibre Channel to PCI Express HBA (rev 03)
On Red Hat Enterprise Linux 5 (5.x) is on /sys/class/fc_host/hostX/port_name
(X is your device 1,2,3,…N)
For get use:
cat /sys/class/fc_host/hostX/port_name
Sample with multiple HBA (Fibre) QLogic
# ls /sys/class/fc_host/
host3 host4 host5 host6
# cat /sys/class/fc_host/host[3-6]/port_name
0x2100001b32936e24
0x2101001b32b36e24
0x2100001b32932821
0x2101001b32b32821
On Red Hat Enterprise Linux 4 (AS/ES) is on /proc/scsi/qla2xxx/1 (1,2,3,..N)
Sample:
Emulex SCSI & RAID Devices Driver Download For Windows 10# egrep [node|port] /proc/scsi/qlx2xxx/0
scsi-qla0-adapter-node=200000e08b1c19f2;
scsi-qla0-adapter-port=210000e08b1c19f2;
# ls /sys/class/fc_host
host0 host1 host2 host3
fdisk -l 2>/dev/null | egrep '^Disk' | egrep -v 'dm-' | wc -l
echo '1' > /sys/class/fc_host/host0/issue_lip
echo '- - -' > /sys/class/scsi_host/host0/scan
echo '1' > /sys/class/fc_host/host1/issue_lip
echo '- - -' > /sys/class/scsi_host/host1/scan
echo '1' > /sys/class/fc_host/host2/issue_lip
echo '- - -' > /sys/class/scsi_host/host2/scan
echo '1' > /sys/class/fc_host/host3/issue_lip
echo '- - -' > /sys/class/scsi_host/host3/scan
cat /proc/scsi/scsi | egrep -i 'Host:' | wc -l
fdisk -l 2>/dev/null | egrep '^Disk' | egrep -v 'dm-' | wc -l
delete LUN
#echo 1 > /sys/block/sdb/device/delete
#echo 1 > /sys/block/sdd/device/delete
How to rescan LINUX OS for new Storage with Emulex HBA card
by Kumar on September 9, 2011
1.How to rescan the new Storage in RHEL4/RHEL5 with Emulex HBA Cards
In order to get the fiber channel adapters detail to rescan, list the /sys/class/fc_host directory. In old RHEL 4 host you will not be getting this listing. In this case you can use the /sys/class/scsi_host directory but it will list all internal adapters too.
# ls -l /sys/class/fc_host
total 0
drwxr-xr-x 3 root root 0 Jul 9 02:37 host0
drwxr-xr-x 3 root root 0 Jul 9 02:37 host1
#echo '1' > /sys/class/fc_host/host1/issue_lip
#echo '1' > /sys/class/fc_host/host2/issue_lip
#echo '- - -' > /sys/class/scsi_host/host1/scan
#echo '- - -' > /sys/class/scsi_host/host2/scan
2. After rescanning, confirm whether you are seeing the new storage disks[LUN] by listing the content under proc
cat /proc/scsi/scsi or cat /proc/scsi/scsi | grep scsi | uniq
3. If you are using powerpath for multipathing, run the below command to scan the powerpath to get the newly added storage devices under powerpath control
powermt config
4. Then Check the newly added device under powerpath using the below command.
powermt display dev=all
5.If you are using device mapper multipathing, run the below command to scan the DMP to get the newly added storage devices under Linux DMP control
multipath -v1
multipath -v2
6.Then Check the newly added device under Linux DMP using the below command.
multipath -ll
Devices How to scan newly added LUN using rescan-scsi-bus.sh ?
ENV : RHEL 5.4 and later
I suggest you NOT to scan the existing LUNs since I/O operations are still in use and if you scan them it will/may corrupt the file system.
So, I always suggest you to scan the new added device or storage. Once you add it,
HBA will detect the device and then you can scan this non-existent LUNs to the HBA. As an example you can execute the command like :
---
#rescan-scsi-bus.sh --hosts=1 --luns=2
---
Note : I assume that on host 1/or on HBA 1, lun 2 doesn't exist.
For more details please get help from :
---
#rescan-scsi-bus.s --help

Emulex SCSI & RAID Devices Driver Download For Windows 10

http://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/5/html/Online_Storage_Reconfiguration_Guide/rescan-scsi-bus.html
Here are outputs for commands:
# uname -a
Linux 64-cncrclinrpts 2.6.38-11-generic-pae #48-Ubuntu SMP Fri Jul 29 20:51:21 UTC 2011 i686 i686 i386 GNU/Linux
# file jasperreports-server-cp-4.1.0-linux-x64-installer.run
jasperreports-server-cp-4.1.0-linux-x64-installer.run: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.4.0, stripped
# ldd -r jasperreports-server-cp-4.1.0-linux-x64-installer.run
not a dynamic executable
install CCI
cd /
cpio -idmu < ./program/RM/HP-UX/RMHORC
/HORCM/horcminstall.sh
This version supports hot adding new luns, etc. Please see text below on how
to perform the lun hot add procedure. The latest driver-v7.00.60-fo has the
mechanism which allows the user to force the driver to do re-scan of the
devices to allow a new device to be added. This triggers the driver to
initiate lun discovery process.
To do this from the command line:
#echo 'scsi-qlascan' > /proc/scsi/<driver-name>/<adapter-id> (qlogic
driver will re-scan)
Where <driver-name> can be either one : qla2100/qla2200/qla2300 <adapter-id>
~ is the instance number of the HBA.
Once that has been done , user then can force the scsi mid layer to do
its own scan
and build the device table entry for the new device:
# echo 'scsi add-single-device 0 1 2 3' >/proc/scsi/scsi
(scsi mid layer will re-scan) with '0 1 2 3'
replaced by your 'Host Channel Id Lun'. The scanning has to be done in
the above mentioned order.
First the driver (qla2300/qla2200 driver etc) and then the Linux scsi
mid layer.
---schnipp---
You take a look into 'dmesg | less' and search for the information about
'Host Channel Id Lun', the Lun you have to know, from the Storage
Administrator.
echo 'scsi-qlascan' > /proc/scsi/qla2200/1
echo 'scsi-qlascan' > /proc/scsi/qla2200/2
echo 'scsi add-single-device 1 0 0 6' >/proc/scsi/scsi
than take a look into 'cat /proc/partions' if the pation is not there
you can do a 'partprobe' (man partprobe).
+ Multi Path
#cat /etc/multipath.conf
multipaths {
multipath {
wwid 360060e80105425e0056fcaee0000000d
alias tuan
}
}
defaults {
user_friendly_names yes
}
blacklist {

Emulex Scsi & Raid Devices Driver Download For Windows 10 64-bit

devnode 'sda'
}
# multipath -ll
tuan (360060e80105425e0056fcaee0000000d) dm-2 HITACHI,DF600F
[size=100G][features=0][hwhandler=0][rw]
_ round-robin 0 [prio=1][active]
_ 1:0:0:0 sdb 8:16 [active][ready]
_ round-robin 0 [prio=0][enabled]
_ 2:0:0:0 sdc 8:32 [active][ready]